MSI 915PM User Manual page 10

Support 2 Serial ATA ports
On-Board Peripherals
On-Board Peripherals include:
- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
- 2 serial ports, Com1 on Rear IO, Com2 via pin header(IO bracket is optional)
- 1 parallel port supports SPP/EPP/ECP mode
- 1 Line-In / Line-Out / MIC-In / Surround Speaker Out / Center-Subwoofer Speaker
Out / Surround Back Speaker Out
- 8 USB ports (Rear * 4/ Front * 4)
- 1 RJ-45 LAN jack (optional)
- 2 * 1394 ports (optional)
On-board LAN (optional)
Realtek 8100C / 8110S / 8110SB (optional)
- Integrated Fast Ethernet MAC and PHY in one chip
- Supports 10Mb/s, 100Mb/s and 1000Mb/s (1000Mb/s for 8100S/SB only)
- Compliance with PCI 2.2
- Supports ACPI Power Management
Audio
8 channels (HDA) audio codec
- Meet PC2001 audio performance requirement
- Can support SPDIF Out via bracket only (optional)
1394 (optional)
Supports up to 2 * 1394 ports, one 6-pin 1394 connector on rear I/O, the other is
supported by onboard pinheader. Transfer rate is up to 400Mbps
Controlled by VIA 6307 chipset
BIOS
4Mb FWH
Provides DMI2.0, WfM2.0, WOL, WOR, and SMBus for system management
Mounting and Dimension
M-ATX Form Factor: 24.5 cm (W) x 24.5 cm (L)
6 mounting holes
Getting Started
1-3