MS-7033 M-ATX Mainboard
Wake Up Event Setup
Press <Enter> and the following sub-menu appears:
PCI Express PME
You can enable/disable PCI Express PME function. Setting options: [Enabled],
[Disabled].
Resume by PCI Device (PME#)
This controls how and whether the system can be powered on by the devices
installed on PCI slots. Setting options: [Disabled], [Enabled].
Resume by Ring
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or
component is detected. Setting options: [Enabled], [Disabled].
Resume By Alarm
The field is used to enable or disable the function of Resume By Alarm. Setting
options: [Disabled], [Enabled].
Date of Month Alarm
When Resume By Alarm is set to Enabled, the field specifies the date for Resume
By Alarm. Setting options: [0]~[31].
Time (hh:mm:ss) Alarm
When Resume By Alarm is set to Enabled, the field specifies the time for Resume
By Alarm. Format is <hour><minute><second>.
3-20