MSI 915PM User Manual page 50

Onboard LAN
The item enables or disables the onboard LAN controller. Setting options: [Enabled],
[Disabled].
OnBoard 1394 (optional)
This setting is used to enable/disable the onboard IEEE 1394 controller. Setting options:
[Enabled], [Disabled].
IO Devices Configuration
Press <Enter> and the following sub-menu appears:
POWER ON Function
This controls how the PS/2 mouse or keyboard can power on the system.
Settings: [Password], [Hot KEY], [Mouse Left], [Mouse Left], [Mouse Right],
[any KEY], [BUTTON ONLY], [Keyboard 98].
KB Power ON Password
If POWER ON Function is set to Password, then you can set a password in the
field for the PS/2 keyboard to power on the system.
Hot Key Power ON
If POWER ON Function is set to [Hot KEY], you can assign a hot key combi-
nation in the field for the PS/2 keyboard to power on the system. Settings: [Ctrl-
F1] through [Ctrl-F12].
Onboard FDC Controller
Select [Enabled] if your system has a floppy disk controller (FDD) installed on the
system board and you wish to use it. If you install add-on FDC or the system has
no floppy drive, select [Disabled] in this field. Setting options: [Enabled], [Disabled].
BIOS Setup
3-15