Table of Contents
Advertisement
CONNECTING THE DVR
EN
Connection Diagram
Connect an ethernet cable
from the LAN port on the
DVR to a spare port on
your router.
If you'd like to set up additional
TVs/monitors for auxiliary and
spot monitoring, connect them
via BNC to RCA/VGA connectors
(not supplied) to the Video Out
outputs on the DVR.
Main CVBS (ch-1)
10
Connect the BNC outputs from your
cameras into the yellow BNC inputs
on the rear of the DVR.
Connect the supplied
AC power cord
If you've got a TV or monitor
with HDMI in, connect to the
HDMI port on the DVR.
Spot (ch-2)
Connect your cameras to
power, using the a power-
splitter (if included).
Connect the power adapter(s)
to a wall outlet.
If you've got a monitor with VGA
but not HDMI, connect it to the
VGA output on the DVR.
Advertisement
Table of Contents
