Table of Contents
Advertisement
ADVANCED CONFIGURATION
EN
Camera Management: Privacy Mask
A Privacy Mask can be used if you want to obscure part of
your image. You can also use this option to minimize false
triggers for motion detection. You can define up to four areas
per channel to mask. Click and drag to select the area you
want to select or de-select.
Remember: Anything obscured by a privacy mask won't be
shown in Live View and will not be recorded.
Camera Management: Tamper Proofing
Tamper Proofing can be used in scenarios where someone
may cover up the camera's field of view or if they are
attempting to tamper with the video signal.
Camera: Select the channel that you want to enable for
tamper proofing.
Enable Tamper-proof (checkbox): Select this to enable
tamper proofing.
Handling: Here you can define what will happen when the
camera you've selected detects tampering. You can adjust
your arming schedule and also select one or more of the
following notifications:
•
Full Screen Monitoring: When the video signal has re-
established connection, the camera will display a full
screen image momentarily.
•
Audible Warning: The DVR will use its internal buzzer
50
to emit an alarm tone. It sounds like an old computer
indicating an error, or a large truck backing up.
•
Alert CMS Software: A warning message is sent to
the SwannView Plus client software installed on the
computer.
•
Send Email: The DVR will send an auto-email alert
when the event type you've selected occurs. To
configure your email settings - see "Configuration:
Network: Email" on page 22 for details.
•
Trigger Alarm Output: Instructs the DVR to output
an alarm signal from the alarm output terminal(s).
The alarm output(s)must be correctly connected and
configured.
Sensitivity: Increase or decrease the level of sensitivity.
Advertisement
Table of Contents
