Maintenance And Service - Bosch IXO Professional Original Instructions Manual

OBJ_BUCH-1384-003.book Page 16 Tuesday, November 8, 2011 2:15 PM
16 | English
Working Advice
Apply the power tool to the screw only when it is switched off. Ro-
tating tool inserts can slip off.
Up to 13 screwdriver bits can be stored on the side of the battery charger
11. The fixture that holds the screwdriver bits can be removed.
Wall-mounting the Battery Charger (see figure G)
The battery charger 11 can be mounted to a wall. For this, hang the charg-
er via the slots on the side onto two screws.

Maintenance and Service

Maintenance and Cleaning
Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational di-
rection switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
For safe and proper working, always keep the machine and venti-
lation slots clean.
When the battery is no longer operative, please refer to an authorised af-
ter-sales service agent for Bosch power tools.
If the replacement of the supply cord is necessary, this has to be done by
Bosch or an authorized Bosch service agent in order to avoid a safety haz-
ard.
If the machine should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order, please always include the
10-digit article number given on the type plate of the machine.
2 609 140 837 | (8.11.11) Bosch Power Tools