Speaker Setting; Switching Display; Theft Deterrent Faceplate - Kenwood KDC-237 Instruction Manual

General features

Speaker Setting

Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
3
Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting alternates
between the settings shown in the table below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [VOL] knob.

Switching Display

Changing the information displayed.
1
Enter Switching Display mode
Press the Control knob for at least 1 second.
"DISP SEL" is displayed.
2
Select the Display item
Push the Control knob towards [4] or [¢].
In Tuner source
Information
Frequency (MW, LW)
Program Service name (FM)
Clock
In CD source
Information
Play time & Track number
Clock
8
|
English
Display
"SP OFF"
"SP 5/4"
"SP 6*9/6"
"SP OEM"
Display
"FREQ"
"FREQ/PS"
"CLOCK"
Display
"P-TIME"
"CLOCK"
In Standby/ Auxiliary input source
Information
Source name
Clock
3
Exit Switching Display mode
Press the Control knob.

Theft Deterrent Faceplate

The faceplate of the unit can be detached and taken
with you, helping to deter theft.
Removing the Faceplate
Press the Release button.
The faceplate unlocks, allowing you to detach it.
¤
• The faceplate is a precision piece of equipment and can
be damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
Reattaching the Faceplate
1
Align the projections on the unit with the
grooves on the faceplate.
2
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use
the unit.
Display
"SRC NAME"
"CLOCK"
Projections
Grooves