Connecting Wires To Terminals - Kenwood KDC-237 Instruction Manual

Connecting Wires to Terminals

Fuse (10A)
Wiring harness
(Accessory1)
22
|
English
FM/AM antenna input
TEL mute wire (Brown)
If no connections are made, do
not let the wire come out from
the tab.
Power control/ Motor
antenna control wire
(Blue/White)
Battery wire (Yellow)
Ignition wire (Red)
⁄
See next page.
A-–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Antenna Cord (ISO)
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
Connect to the terminal that
is grounded when either the
telephone rings or during
conversation.
⁄
To connect the Kenwood
navigation system, consult
your navigation manual.
Connect either to the power
control terminal when using the
optional power amplifier, or to
the antenna control terminal in
the vehicle.