Table of Contents
Advertisement
Menu system
Auxiliary Input Display Setting
Selecting the display when alternating to Auxiliary
input source.
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Auxiliary input display setting mode
Push the Control knob towards [FM] or [AM].
Select the "NAME SET" display.
4
Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The selected Auxiliary input display is displayed.
5
Select the Auxiliary input display
Push the Control knob towards [4] or [¢].
Each time you push the knob, the display alternates
as listed below.
• "AUX"
• "DVD"
• "PORTABLE"
• "GAME"
• "VIDEO"
• "TV"
6
Exit Auxiliary input display setting mode
Press the [MENU] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
In Standby mode
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
Display
Setting
"AUX OFF"
When selecting the source there's no Auxiliary Input.
"AUX ON1"
When selecting the source there's Auxiliary Input.
When the unit is turned on by AUX source, the attenuator
"AUX ON2"
function is activated. Press [ATT] button to cancel the
attenuator function in order to listen to the external
equipment.
20
|
English
⁄
• Setting to "AUX ON2" will not output the noise which is
produced when an external equipment is not connected
to the AUX terminal.
In Standby mode
Power OFF Timer
Setting the timer to turn this unit's power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle's battery
power.
Display
Setting
"OFF – – –"
Power OFF Timer function is OFF.
"OFF 20M"
Turns the power OFF after 20 minutes.
(Original setting)
"OFF 40M"
Turns the power OFF after 40 minutes.
"OFF 60M"
Turns the power OFF after 60 minutes.
In Standby mode
Demonstration mode Setting
Sets the demonstration mode.
1
Select the Demonstration mode
Push the Control knob towards [FM] or [AM].
Select the "DEMO" display.
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display
Setting
"DEMO ON"
The Demonstration mode function is ON.
"DEMO OFF"
Exit Demonstration mode (Normal mode).
Hide quick links:
Advertisement
Table of Contents
