Operation / Condition LCD driver Remote control sensor KDC-132CR only Key scan start SW ON when the base goes “Lo” DAUGHTER UNIT (X89-2690-10) : KDC-1032 only Ref. No. Application / Function Operation / Condition Q221,222 2-PREOUT MUTE ON when the base goes “Hi”...
KDC-1032/132/132CR KDC-133/233/234SGY COMPONENTS DESCRIPTION Ref. No. Application / Function Operation / Condition Focusing, tracking, sled and spindle servo processing. CD SIGNAL PROCESSOR Automatic adjustment (focusing, tracking, gain, offset and balance) operations. built-in µ-COM Digital signal processing (DSP, PLL, sub-codes, CIRC error correction, audio data interpolation processing) operations, and microcomputer function.
Page 5
Destination 2 TYPE1 Destination 1 TYPE0 Destination 0 TUNER-TYPE1 E-VOL setting switching H: OEM model 1, L: KENWOOD brand model VSS1 TUNER-TYPE1 E-VOL setting switching H: OEM model 0, L: KENWOOD brand model H: Mute ON, L: Mute OFF MUTE...
Page 6
KDC-1032/132/132CR KDC-133/233/234SGY MICROCOMPUTER’S TERMINAL DESCRIPTION Pin No. Pin Name Application Truth value table Processing Operation Description LO/EJ CD mechanism Loading/Eject switching H: Eject, L: Loading M-STOP CD mechanism Stop output H: CD ON, L: Stop M-RST CD mechanism Reset output...
KDC-1032/132/132CR KDC-133/233/234SGY TEST MODE • Pressing the [VOL] key for more than a second enters the How to enter the test mode audio setup mode. • Press Preset [1] and Preset [3] keys simultaneously to re- • Use [AM/FM] key to switching items.
Page 10
Description (Pin 5) (Pin 6) q KENWOOD brand model Backup current measurement w KENWOOD brand model with High The MUTE terminal turns off in 2 seconds instead of 15 seconds when moved to ACC OFF. CRSC changed e OEM model with CRSC changed...
Page 11
KDC-1032/132/132CR KDC-133/233/234SGY ADJUSTMENT 1. IC10 (X34-) -The Tuner adjustment method 1-3. Adjustment of FM ANT & RF coil • When IC10 and its circumference are repaired, according Voltage Check Point : S-METER-Check Land to the following order, it readjusts if needed.
Page 12
KDC-1032/132/132CR KDC-133/233/234SGY ADJUSTMENT 2. IC10 (X34-) Replacement - Parts vs Adjustment Item Table • When the parts in the following tables are exchanged, please readjust according to a table. • When other parts are exchanged, please perform only a check of operation. There is no necessity for readjustment.
Page 13
KDC-1032/132/132CR KDC-133/233/234SGY PC BOARD (COMPONENT SIDE VIEW) (FOIL SIDE VIEW) SWITCH UNIT SWITCH UNIT X16-356x-xx (J76-0183-02) X16-356x-xx (J76-0183-02) DATAS DATAL LED+B RTRY CW RTRY CCW PAN 5V X16-356x-xx X16-356x-xx Ref. No. Address Ref. No. Address Refer to the schematic diagram for the values of resistors and capacitors.
KDC-1032/132/132CR KDC-133/233/234SGY PC BOARD (COMPONENT SIDE VIEW) CD PLAYER UNIT X32-5840-00 (J76-0190-02) X32-5840-00 Ref. No. Address Refer to the schematic diagram for the values of resistors and capacitors.
Page 17
KDC-1032/132/132CR KDC-133/233/234SGY PC BOARD (FOIL SIDE VIEW) CD PLAYER UNIT X32-5840-00 (J76-0190-02) SLED DRVMUTE SPDL SPDL LOE/LIM A.GND A.+8V C100 R100 /MRST /MSTOP SLED OUT /MUTEL /LOAD /MUTER SLED IN /EJECT BU.5V Vref 2 GCTL NRFDET RFENV TRCRS R8 R11...
Page 24
KDC-1032/132/132CR KDC-133/233/234SGY CAUTION : For continued safety, replace safety criti- cal components only with IOP+ IOP- m a n u f a c t u r e r ’ s r e c o m - R7 3.6K mended parts (refer to parts list).
PROTECTION BAG (0.03X180X400) M1M2 E29-2068-04 CONDUCTIVE RUBBER H54-3570-03 ITEM CARTON CASE (KDC-132) K E59-0851-05 RECTANGULAR PLUG H54-3571-03 ITEM CARTON CASE (KDC-1032) K1 H54-3576-03 ITEM CARTON CASE (KDC-234SGY) E5 RK73GB2A563J CHIP R J 1/10W H54-3577-03 ITEM CARTON CASE (KDC-133) M1 RK73GB2A4R7J...
Page 28
CK73GB1H222K CHIP C 2200PF R100 RK73GB2A100J CHIP R J 1/10W K : KDC-132 K1 : KDC-1032 K2 : KDC-132CR M1 : KDC-133 M2 : KDC-233 E5 : KDC-234SGY Indicates safety critical components. (E : Europe K : North America M : Other Areas...
Page 29
CHIP C 68PF C600 CD04AT1A101M ELECTRO 100UF 10WV K : KDC-132 K1 : KDC-1032 K2 : KDC-132CR M1 : KDC-133 M2 : KDC-233 E5 : KDC-234SGY Indicates safety critical components. (E : Europe K : North America M : Other Areas...
Page 30
RK73GB2A363J CHIP R J 1/10W R231,232 RD14BB2C101J J 1/6W KK1K2 K : KDC-132 K1 : KDC-1032 K2 : KDC-132CR M1 : KDC-133 M2 : KDC-233 E5 : KDC-234SGY Indicates safety critical components. (E : Europe K : North America M : Other Areas...
Page 31
E-TDA7386 ANALOGUE IC W165 R92-2053-05 CHIP R 0 OHM J 1/8W K : KDC-132 K1 : KDC-1032 K2 : KDC-132CR M1 : KDC-133 M2 : KDC-233 E5 : KDC-234SGY Indicates safety critical components. (E : Europe K : North America...
Page 32
GEAR D13-2153-04 GEAR D13-2154-04 GEAR D13-2155-04 WORM K : KDC-132 K1 : KDC-1032 K2 : KDC-132CR M1 : KDC-133 M2 : KDC-233 E5 : KDC-234SGY Indicates safety critical components. (E : Europe K : North America M : Other Areas...
Page 33
KDC-1032/132/132CR KDC-133/233/234SGY PARTS LIST CAPACITORS 2 2 0 • Capacitor value CC45 Color* 010 = 1pF 0 = 22pF 1 = Type ... ceramic, electrolytic, etc. 4 = Voltage rating 100 = 10pF 2 = Shape ... round, square, etc.
LW (KDC-234SGY) Weight ............1.30kg (2.9lbs) Frequency Range ........153kHz~281kHz Usable Sensitivity (S/N : 20dB) ........45µV KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. Laser Diode ............... GaAlAs Digital Filter (D/A) ......8 Times Over Sampling D/A Converter ..............