Audio Setup; Speaker Setting - Kenwood KDC-MP338 Instruction Manual

Audio Setup

You can set Sound system , such as follows;
Adjustment Item Display
Front High Pass Filter* "HPF"
Rear High Pass Filter* "HPR"
Low Pass Filter "LPF SW"
Subwoofer Phase* "PHASE"
Volume offset "V-OFFSET" –8 — ±0 (AUX: -8— +8)
Loudness* "LOUDNESS" OFF/ON
Dual Zone System* "2ZONE"
*Function of KDC-X492/KDC-MP438U/KDC-MP408U.
*1KDC-X492 only. *2KDC-MP438U/KDC-MP408U only.
*3KDC-MP338 only.
⁄
• Volume offset: Sets each source's volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones during
low volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by "ZONE2" of <Menu
System> (page 12).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by Control knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 6) or [5]/[∞] button on the remote control
(page 15).
- The Audio Control has no effect on sub source.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the Control knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the Control knob.
4
Adjust the Audio setup item
Turn the Control knob.
5
Exit Audio Setup mode
Press the Control knob for at least 1 second.
Range
Through/40*1/60*1/80/100/120/
150/180/220*1 Hz
Through/40*1/60*1/80/100/120/
150/180/220*1 Hz
50*1/60*1,2/80/100*1/120/160*3/
Through Hz
Reverse (180°)/ Normal (0°)
OFF/ON

Speaker Setting

Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the Control knob.
3
Select the Speaker type
Turn the Control knob.
4
Exit Speaker Setting mode
Press the Control knob.
Display
"SP SEL OFF"
"SP SEL 5/4"
"SP SEL 6*9/6"
"SP SEL OEM"
English
7
|