System Setup - Kenwood KVT-614 Instruction Manual

Setup Menu

System Setup

You can set up the system parameters.
1 Display the System Setup screen
Touch
Menu" screen (page 62).
2 Setup each item
2
3
4
5
1 Moves to the "System Setup 2" screen.
2 Turns the key touch tone On or Off.
( "ON")
3 Allows scrolling of text display on the
Source Control screen. (
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
4 Selects a remote control signal. (
When turned "OFF", the remote control of
TV reception is rejected.
5 Sets a music CD playback. (
"1": Automatically recognizes and plays
back an Audio file disc, a DVD or a
music CD.
"2": Forcibly plays back a disc as a music
CD. Select "2" if you wish to play a
music CD having a special format or
if you cannot play a disc in the "1"
position.
⁄
• You cannot play an Audio file/VCD disc in the "2"
position. Also, you may not play some music CDs in the
"2" position.
• Your setup is disabled when the disc is being played.
66 KVT-614
in the "Setup
1
"Auto")
"ON")
"1")
6
8
9
10
6 Returns to the "System Setup 1" screen.
7 Moves to the "System Setup 3" screen.
8 Sets the button illumination color.
See <Panel Color Coordinate> (page 67).
9 When set to "ON", the illumination color of
the screen and buttons changes one after
another.
p Select an illumination color of receiver
buttons. ( Red)
"Green": Green
"Red": Red
11
13
q Returns to the "System Setup 2" screen.
w Moves to the "System Setup 4" screen.
e Sets the function of the [NAV] button.
"V. OFF" : Press the [NAV] button for
more than 1 second to turn the
display off.
"R-CAM" : Press the [NAV] button for more
than 1 second to switch to rear
view.
7
12