3 way speaker system setup
Connect the speaker wires
Mid Range output
To MID Range left speaker
To MID Range right speaker
To left Tweeter
To right Tweeter
When using the optional power amplifier,
connect this wire to its power control
terminal.
If no connections are made, do not
⁄
let the wire come out from the tab.
For how to connect speaker wires
⁄
to terminals other than speaker
terminals and Preout terminals, refer
to <Connecting wires to terminals>
(page 12).
14 | Quick Start Guide
Tweeter output
R
Woofer output
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
L
R
L
Wiring harness
(Accessory1)
Blue/White
(Power control wire)
P.CONT
¤
Select a crossover mode according to
how the speakers are connected. Refer
to <2-Way/3-Way Crossover Setting>
(next page).
If you select a wrong mode:
• The speakers can break.
• The output sound level may be
extremely low.