Hands Free Unit Control; Control Screen Function - Kenwood KVT-614 Instruction Manual

Hands Free Unit Control

Various functions can be used in the Hands Free control mode. (with the optional accessory Bluetooth unit
connected only)
• You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the
Bluetooth Unit as well
• To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of
your Bluetooth Unit and your cell-phone.

Control Screen Function

Displaying the control screen and using various
functions.
1 Display the Hands-Free Control screen
Press the [FNC] button for more than 1 second.
2
3
4
5
6
10
7
1 Displays the various conditions.
: Displays short message status. If a cell-
phone which supports SMS function
is not connected, this mark does not
appear.
: There is unread short message.
: There is no unread short message.
: Downloading Phonebook.
: Indicates there is a call on hold.
: Displays the signal strength.*
The more the number of bar segments,
the stronger the signal.
: Displays the present Auto Answering
status
: When Auto Answering is on
: When Auto Answering is off
: Displays the battery drain of the cell-
phone.*
The more the number of bar segments,
the higher the battery level.
50 KVT-614
1
8
9
11
12
2 Displays the called phone numbers.
If you have registered a phone number in
the Phonebook, the destination person
name is displayed.
3 Calls the displayed preset phone number.
4 Displays the SMS Select screen.
See <SMS (Short Message Service)> (page
61).
5 Displays the Search for Phonebook screen.
See <Calling by Phonebook> (page 53).
6 Displays the Outgoing Calls screen.
See <Making a Call Using Outgoing/
Incoming Call Records> (page 55).
7 Displays the Incoming Calls screen.
See <Making a Call Using Outgoing/
Incoming Call Records> (page 55).
8 Calls the preset phone number.
For information on how to preset a phone
number, see <Phone Number Preset> (page
60).
9 Displays the Hands-Free Set Up screen.
See <Setting Up the Hands-Free Phone>
(page 57).
p Displays the Dialing Display screen.
See <Calling by Entering a Phone Number>
(page 52).
q Starts voice recognition.
See <
Calling by Voice Recognition
56).
w Returns to the previous screen.
> (page