Radio Listening; Functions While Displaying The Control Screen - Kenwood KVT-614 Instruction Manual

Radio Listening

Various control screens appear in the Tuner Source mode.
• For the basic method of receiver button operations, see <Basic Operations> (page 10).
• Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch>
(page 92).
Functions While Displaying the Control
Screen
Switches to the source control screen to use
various functions.
[TUNER] button on the "Source Select" screen
1
13
7
9 10
8
15
1 Band display
2 Preset number
3 Frequency display
28 KVT-614
3
2
5
7
6
12
11
14
16
17 18
4 Radio station information display.
Selects the Program Service Name, Title &
Artist name, Station Name, Category Name
1/2, or Radio Text.
5 Switches to the FM1/2/3 band.
6 Switches to the AM band.
7 Tunes in a station.
Use the <Seek Mode> (page 29) to change
the frequency switching.
8 Switches the button display.
9 Turns the CRSC function On or Off. (Only
when receiving the FM broadcast)
p Selects the Auto Memory mode.
(See page 30 for the <Auto Memory>)
q Switches the Seek mode.
(See page 29 for the <Seek Mode>)
w Switches the number of lines displayed in
the Information Display.
e Turns the Traffic Information function On or
Off.
See <Traffic Information> (page 32).
r When
can recall the stations on memory.
4
For memory of broadcasting stations, see
<Auto Memory> (page 30) or <Manual
Memory> (page 30).
t Sets a name to the station. See <Set Station
Name> (page 31).
y Searches station by program type. See
<Search for Program Type> (page 32).
u Lists and selects memorized station.
i Displays Radio Text screen. See <Radio
Text> (page 31).
to buttons appear, you