System Setup - Kenwood DDX8022BT Instruction Manual

Setup Menu

System Setup

You can setup the system parameters.
1 Display the SETUP System screen
Touch
Menu" screen (page 62).
2 Setup each item
2
3
4
5
1 Moves to the "SETUP System 2" screen.
2 Turns the key touch tone On or Off.
( "On")
3 Allows scrolling of text display on the
Source Control screen. (
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
4 Selects a remote control signal. (
When turned "Off", the remote control of TV
reception is rejected.
5 Sets a music CD playback. (
"1": Automatically recognizes and plays
back an Audio file disc, a DVD or a
music CD.
"2": Forcibly plays back a disc as a music
CD. Select "2" if you wish to play a
music CD having a special format or
if you cannot play a disc in the "1"
position.
6 Returns to the "SETUP Menu" screen.
⁄
• You cannot play an Audio file/VCD disc in the "2"
position. Also, you may not play some music CDs in the
"2" position.
• Your setup is disabled when the disc is being played.
70 DNX8220BT/DDX8022BT
in the "SETUP
1
6
"Manual")
⁄
"On")
• *1 The setting operation can be made only when in
"1")
7
8
9
7 Returns to the "System SETUP 1" screen.
8 Sets the function of the [NAV] button.
"V. OFF: Press the [NAV] button for more
than 1 second to turn the display
off.
"R. CAM": Press the [NAV] button for more
than 1 second to switch to rear
view.
9 Sets whether using DSP function or not
when playing DVD-Audio.*
"On": Uses DSP function when playing
DVD-Audio. If the sampling frequency
of the disc is greater than 48 kHz, it is
fixed to 48 kHz.
"Off": DSP fuction is not used in any source.
p Returns to the "SETUP Menu" screen.
stanby source (when AV-Out setting of AV Interface
Setup is set to other than DVD), and when in stop mode
of DVD source.
10
1
( "On")