Precautions - Extreme Networks Altitude 4532 Series Installation Manual

Precautions

Part
SKU Number
AP4532e-ROW 15768
AP4532e-EU 15799
NOTE
In the above SKU numbers, "US" represents the United States regulatory model, and "ROW"
represents the Rest of World regulatory model.
3 Review site survey and network analysis reports to determine the location and mounting
position for the Altitude 4532 Access Point.
4 Connect a CAT-5 or better Ethernet cable to a compatible 802.3af power source and run
the cable to the installation site. Ensure there is sufficient slack on the cable to perform
the installation steps.
NOTE
When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable is recommended
for Gigabit operation.
Precautions
Before installing an Altitude 4532 Access Point, verify the following:
Extreme Networks recommends that you do not install the Altitude 4532 Access Point in
●
wet or dusty areas.
Verify that the environment has a continuous temperature range between 0° C to 50° C.
●
Altitude™ 4532 Series Access Point Installation Guide
Description
Altitude AP4532e dual-radio Independent indoor Access Point for the
Rest of the World regulatory domain, 802.11a/b/g/n, 2x3 MIMO.
External antennas not included-must order separately up to 6 paddle
antennas. Powered by 802.3af/at PoE or by use of a PoE injector.
Altitude AP4532e dual-radio Independent indoor Access Point for the
European Union regulatory domain, 802.11a/b/g/n, 2x3 MIMO. External
antennas not included-must order separately up to 6 paddle antennas.
Powered by 802.3af/at PoE or by use of a PoE injector.
10