Hardware Installation; Installation Instructions; Precautions; Access Point Placement - Extreme Networks AP-8432 Installation Manual

Hardware Installation

Installation Instructions

An AP-8432 Access Point mounts either on a wall (with M 3.5 x 0.6 x 23 MM pan head
screws and mounting bracket or equivalent) or on a suspended ceiling T-bar.
To prepare for the installation:
1 Match the part number on the purchase order with the part numbers in the packing list
and on the case of the Access Point.
2 Verify the contents of the box include the intended AP-8432 Access Point, and the
included hardware matches the package contents (see
page 6 .
)
Part Number
AP-8432-680B30-US
AP-8432-680B30-1-WR
3 Review site survey and network analysis reports to determine the location and mounting
position for the AP-8432 Access Point.
4 Connect a CAT-5 or better Ethernet cable to a compatible 802.3at or 802.3af power
source and run the cable to the installation site. Ensure there is sufficient slack in the
cable to perform the installation steps.
NOTE
When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable is
recommended for Gigabit operation.

Precautions

Before installing an AP-8432 Access Point, verify the following:
• Your are using the correctly rated power solution for the AP-8432 (either the AP-
PSBIAS-2P3-ATR Power Injector or the PWR-BGA48V45W0WW external power supply)
• Do not to install the AP-8432 in wet or dusty areas.
• Verify the environment has a continuous temperature range between 32° F to 140° or 0°
C to 60° C.

Access Point Placement

For optimal performance, install the Access Point away from transformers, heavy-duty
motors, fluorescent lights, microwave ovens, refrigerators and other industrial equipment.
Signal loss can occur when metal, concrete, walls or floors block transmission. Install the
Access Point in an open area or add Access Points as needed to improve coverage.
AP-8432 Installation Guide
Description
AP-8432 dual radio 802.11ac 4x4:4 MIMO Access Point
internal antenna US version
AP-8432 dual radio 802.11ac 4x4:4 MIMO Access Point
internal antenna International version
Hardware Installation
AP-8432 Package Contents on
7