Connecting Wires To Terminals - Kenwood KDC-MP832U Instruction Manual

Kenwood cd-receiver instruction manual kdc-x890, kdc-mp832u
Hide thumbs Also See for KDC-MP832U:
Table of Contents

Advertisement

Connecting Wires to Terminals

To USB device
To use the steering wheel
remote control feature, you
need to an exclusive remote
adapter (not supplied)
matches your car is required.
REMO.CONT
Steering remote control
(Light Blue/Yellow)
(KDC-X890 only)
Fuse (10A)
Wiring harness
(Accessory1)
Power control wire (Blue/White)
Motor antenna control wire (Blue)
TEL mute wire (Brown)
External amplifier control wire
(Pink/Black) (KDC-X890 only)
Dimmer control wire (Orange / White)
FRONT • L
FRONT • R
REAR • L
REAR • R
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
• Do not remove the cap
when you do not use the
USB cable. The connector
will cause the unit to
malfunction if it gets in
touch with any metallic
part of the vehicle.
• Fasten the connector with
the tape so that the cable
will not come off.
USB connector
If no connections are made, do not let the wire come out from the tab.
P.CONT
ANT.
CONT
MUTE
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Car fuse box
(Main fuse)
ACC
Sub Woofer right output (Red)
SUB
WOOFER
Sub Woofer left output (White)
Rear right output (Red)
REAR
Rear left output (White)
Front right output (Red)
FRONT
Front left output (White)
AUX right input (Red)
AUX IN
AUX left input (White)
FM/AM antenna input
To Kenwood disc changer/ External optional accessory
To connect these leads, refer to the relevant
instruction manuals.
When using the optional power amplifier, connect to its power
control terminal.
Depending on what antenna you are using, connect either to the
control terminal of the motor antenna, or to the power terminal
for the booster amplifier of the film-type antenna.
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
To connect the Kenwood navigation system, consult your
navigation manual.
To "EXT.AMP.CONT. " terminal of the amplifier having the external
amp control function.
To car light control switch
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Ignition key
switch
Car fuse
box
+
Battery
59
|
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-x890

Table of Contents