Table of Contents
Advertisement
Menu system
Function of the KDC-X890
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the
unit.
1
Select AMP Control mode
Push the Control knob towards [FM] or [AM].
Select the "AMS Control" display.
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Control knob towards [FM] or [AM].
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Push the Control knob towards [4] or
[¢].
5
Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.
48
|
English
Other than Standby mode
Traffic Information
Switching to traffic information automatically
when a traffic bulletin starts even when you aren't
listening to the radio.
Display
Setting
"TI : OFF"
The Traffic Information function is OFF.
"TI : ON"
The Traffic Information function is ON.
When a traffic bulletin starts, "Traffic INFO" is
displayed it and it switches to traffic information.
• During reception of an AM station when the Traffic
Information function is turned ON, it switches to an
FM station.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it's automatically
the remembered volume.
Receiving other traffic information stations
(In tuner source)
Push the Control knob towards [4] or
[¢].
• You can change the traffic information station when
listening to the radio.
In FM reception
CRSC (Clean Reception System
Circuit)
Temporarily have reception alternate from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Display
"CRSC : ON"
"CRSC : OFF"
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.
Setting
The CRSC is ON.
The CRSC is OFF.
Hide quick links:
Advertisement
Table of Contents
