How To Use - Oster BVSTEM8000RD Instruction Manual

Note: If unit has not been used for a prolonged period of time, run one cycle
without a capsule before preparing first shot of espresso to optimize the brewing
temperature. Refer to "Priming the unit" instructions.
1. Fill the water tank with fresh, still drinking water between the "Min" and "Max" levels.
2. Press the power button to turn the appliance on "I".
3. The three function buttons will start blinking simultaneously indicating that the
unit is warming up. Once the buttons light stay solid on, the unit is ready to be
used.
4. Place the drip tray grid inside the drip tray in the desired position to adjust for
the cup/mug height according to the cup you wish to use (see figure 1).
5. Lift the lever to open the capsule compartment and insert the capsule, pressing
it gently into place (see figure 2).
H OW TO USE
(Figure 1)
(Figure 2)
En g lish -5