Before First Use; P R I M I N G T He U Nit - Oster BVSTEM8000RD Instruction Manual

Always clean your Espresso Maker before using for the first time. Make sure that
your 1st cup of coffee is as good as can be by cleaning your Oster
before its first use. just follow these simple steps:
1. Remove all packaging materials, stickers and tapes.
2. Wash the water tank, water tank lid, used capsules drawer, drip tray grid and drip
tray with warm soapy water. Never use abrasive cleansers, steel wool pads or
other abrasive materials. DO NOT WASH PARTS ON DISHWASHER.
CAUTION! Never immerse the unit itself in water, in any other liquid or place in
the dishwasher.
3. Dry all pieces thoroughly.
4. Install all parts back onto the unit.
5. Make sure the water tank is attached in tightly in place back on the unit to ensure
proper operation.
NOTE: If water tank is not properly attached to the unit, water will not flow into it
and unit will not brew.
1. Fill the water tank with fresh, still drinking water.
2. Plug in the appliance and press the power button on "I".
NOTE: There is no need to insert a capsule for priming
3. The three function buttons will start blinking simultaneously indicating that the
unit is warming up. Once the buttons light stay solid on, the unit is ready to be
used.
4. Place a large container/cup under the dispensing spout.
5. Press one of the coffee buttons and wait for the unit to complete the priming
cycle.
6. At the end of the priming cycle, the unit will emit a beep sound and all 3 buttons
will be solid on.
7. At the end of this operation, empty out the water from the used capsule drawer
and drip tray.
BE F O RE FIR ST U SE

P R I M I N G T HE U NIT

En gl ish -4
Espresso Maker
®