Table of Contents
Advertisement
Installation (non-Japanese cars)
Firewall or metal support
Screw (M4X8)
(commercially
available)
Metal mounting strap
Phillips truss head
(commercially
sheet metal screw
available)
(commercially available)
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (for example, the sound may skip).
Bend the tabs of the
mounting sleeve with
•
a screwdriver or similar
utensil and attach it in
place.
•
— 36 —
To attach this unit, make sure the front of the control panel faces
you and fit it into the mounting sleeve by pressing the four corners
of the hard rubber frame at the same time.
Do not apply strong pressure to other sections than the corners;
otherwise troubles such as the impossibility of opening or closing
the panel may result.
The hollow at the center of the rubber frame is designed to make it
easier to remove discs.
If you do not want the hollow to be visible, mount the rubber frame
in the opposite direction (with the flat side at the top instead of the
bottom).
Advertisement
Table of Contents
