Power; Theft Deterrent Panel; Hiding The Control Panel - Kenwood KDC-8023 Instruction Manual

Cd receiver
Hide thumbs Also See for KDC-8023:
Table of Contents

Advertisement

Theft Deterrent Panel

The Backpanel of the unit can be detached and taken with you,
helping to deter theft.
Removing the Backpanel
1
Turn the ignition OFF or press the [SRC] button for at least 1
second.
Turn OFF the power, and the control panel becomes horizontal.
After the set time passes in <OFF Wait Time Setting> (page 30), the
panel is closed.
2
Remove the Backpanel forward.
When <DSI (Disabled System Indicator)> (page 29) is set to ON,
DSI blinks.
• The back panel is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the back panel
in its special storage case while detached.
• Do not expose the Backpanel or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
Reattaching the Backpanel
1
Set the Backpanel to the panel bracket.
2
Hold down on the Backpanel until it is locked.

Hiding the Control Panel

Prevents tampering with the unit while your car is being serviced
etc.
Hiding the control panel
Press the [SRC] button for at least 1 second.
When the time set in <OFF Wait Time Setting> (page 30) lapses,
the panel is hidden and the power turns OFF.
Showing the control panel
Press the left part at the lower side of the panel.
The panel is opened to enable the operation.
— 15 —

Advertisement

Table of Contents
loading

Table of Contents