Microphone Sensitivity Adjust; Auto Response Time Adjust; Touch Sensor Tone; Manual Clock Adjustment - Kenwood KDC-8023 Instruction Manual

Cd receiver
Hide thumbs Also See for KDC-8023:
Table of Contents

Advertisement

Microphone sensitivity adjust

<When hands free unit connecting>
Adjusting the volume of the Microphone.
Display and Setting
"HF MIC 0"
"HF MIC 15" (Original setting)
"HF MIC 31"

Auto Response time Adjust

<When hands free unit connecting>
Setting the time from an incoming call to the automatic
response.
Display and Setting
"HF WT OFF"
"HF WT 1S"
"HF WT 5S" (Original setting)
"HF WT 30S"
If the time set in the GSM telephone is shorter than that set in the
unit, the former will be used.

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"Beep ON"
"Beep OFF"

Manual Clock Adjustment

1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1 second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
Display
"DSI ON"
"DSI OFF"
— 29 —
Setting
Beep is heard.
Beep canceled.
Setting
LED flashes.
LED OFF.

Advertisement

Table of Contents
loading

Table of Contents