Table of Contents
Advertisement
Menu system
Selectable Illumination
Selecting the button illumination color as green or red.
Display
Setting
"Button Green"
The illumination color is green.
"Button Red"
The illumination color is red.
Contrast Adjustment
Adjusting the display contrast.
Display and Setting
"Contrast 0"
"Contrast 5" (Original setting)
"Contrast 10"
Dimmer
Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display
"Dimmer ON"
"Dimmer OFF"
OFF Wait Time Setting
Setting the time until the faceplate hide operation starts after the
power is turned OFF.
The faceplate can be removed only during the set time period.
Setting
The display dims.
The display doesn't dim.
— 30 —
Display and Setting
"Off Wait 0s"
"Off Wait 3s" (Original setting)
"Off Wait 25s"
Eject angle setting
This function sets the opening and closing operation of a panel
when a disc is inserted and when it is ejected.
Display
Setting
"Ejct Ang Slp"
Opens and closes the panel while
maintaining the angle of the control panel
to the set angle.
"Ejct Ang Lvl"
Opens and closes the panel after setting
the angle of the control panel to the
horizontal position.
Switching preout
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display
"SWPRE Rear"
"SWPRE N-Fad"
<In Standby mode>
<In Standby mode>
Setting
Rear preout.
Non-fading preout.
Advertisement
Table of Contents
