Alarm: Video Loss - Swann DIGITAL VIDEO RECORDER Instruction Manual

Alarm: Video Loss

"Video Loss"
is regarded as a potential alarm event, and is considered to occur
any time that the DVR doesn't receive an active video signal on any of its inputs.
The default behaviour of the DVR, when a channel has no incoming video signal,
is simply to display "Video Loss" in white text on a black background over the
associated channel. If you're not using all the inputs on your DVR, then some
channels will be in "permanent" video loss state. Just be sure that you don't
enable a video loss action for these channels.
Channel:
Which channel/camera you'd like to set the video loss behaviour for.
Enable:
Whether the selected channel has video loss monitoring active or not.
Schedule:
Schedule when the current video loss action will be active.
Action:
The action you'd like the DVR to take when this event occurs. It's set in the
same way as the action for any other event.
Action Settings
Audio Warning:
The DVR will use its buzzer to emit an alarm tone.
Send Email:
The DVR will send an auto-email alert when the event type you've
selected occurs.
Push:
The DVR will send a push notification to your SwannView Link app.
19
19