Table of Contents
Advertisement
4/8CH Triplex DVR Combo
5.1. Channel Number
To select or specify the channel for detection.
"
" (default) (Full screen mode): you can detect all channels (4) on the screen of full-screen
"1,2,3,4": you can detect each channel (4) be selected on the screen
5.2. Video Loss Alarm
To select or specify the channel for detection.
"Mute": No beep whatever video loss or not.
"
Buzzer-Short": Beep shortly by buzzer on main board when video loss.
"
Buzzer-Long": Beep long by buzzer on main board when video loss.
"
Alarm-Short": Beep shortly by speaker of system when video loss.
"
Alarm-Long": Beep long by speaker of system when video loss.
5.3. Trigger Full Screen
To display the trigger channel on full screen when it act as 1sec, 2sec ... or 30sec.
"
OFF" : It will not display on full screen when the channel has been triggered.
Also, the trigger area will turn to "red-color"
5.4. Trigger Type
There are two trigger types: "Initial Trigger" and "Continuous Trigger" for selection.
Initial Trigger: When channel has been triggered, it will display on full screen as the setting time
period. In that time period, this channel will ignore any other trigger.
Continuous Trigger: When channel has been triggered, it will display on full screen as the setting
time period. In that time period, this channel is still watching out. If another trigger act, the channel
will display on full screen and count all over again by the setting time period.
Digital Video Recorder
33
Advertisement
Table of Contents
