Tuner Operation; Basic Operation; Station Preset Memory; Tuner Setting - Kenwood KDC-BT645U Instruction Manual

Function of KDC-BT645U

Tuner Operation

[SRC] [VOL]
[ ] / [
[ ][BAND]

Basic Operation

Selecting Tuner source
Press the [SRC] button.
Select the "TUNER" display.
Selecting the Receiving Band
Press the [BAND] button.
Each time you press the button, the receiving band
alternates between the FM1, FM2, FM3 and AM.
Selecting the Receiving station
Press the [4] or [¢] button.
During reception of stereo stations the "ST"
indicator lights up.
Selecting the preset channel
Press the [1] – [6] button.

Station Preset Memory

Putting a station in the memory.
1
Select the frequency to put in the memory
Press the [4] or [¢] button.
2
Select the number to put in the memory
Press the [1] – [6] button for at least 2 seconds.
⁄
• Up to 6 stations with a different band (FM/AM) and
another Satellite Radio Tuner can be memorized to the
[1] – [6] button according to the setting of "PRESET TYPE"
of <Initial Setting> (page 20).
10
|
KDC-BT645U/ KDC-HD545U
]
[1] [6]
—

Tuner Setting

You can select following Tuner Setting items.
1
Select the TUNER source
Press the [SRC] button.
Select the "TUNER" display.
2
Enter Function Setting mode
Press the [VOL] knob for at least 1 second.
"FUNCTION" is displayed.
3
Select the function item
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "SETTINGS"
Function item Selectable setting/item
"SEEK MODE" Selects the tuning mode of the radio.
AUTO1: Automatic search for a station.
AUTO2: Search in order of the stations in the Preset
memory.
MANUAL: Normal manual tuning control.
"AUTO MEMORY"* Putting stations with good reception in the memory
automatically.
NO/YES
"MONO SET" You can reduce the noise when stereo broadcasts
are received as monaural. (FM band only)
OFF/ON
(Factory setting: Underlined)
4
Make a setting
Turn the [VOL] knob and press it when the
desired item is displayed.
When select "AUTO MEMORY":
Turn the [VOL] knob to select "YES", and then
press the [VOL] knob.
When 6 stations that can be received are put in the
memory, auto memory entry closes.
5
Exit Function Setting mode
Press the [ ] button for at least 1 second.
⁄
• * This setting can be made when "TYPE NORMAL" is
selected for the "PRESET TYPE" of <Initial Setting> (page
20).
Function item.