Kenwood KDC-BT640U Quick Start Manual

How to connect your iPhone to Alexa on the Kenwood KDC-BT640U
1. Connect the iPhone to the Kenwood KDC-BT640U via "BLUETOOTH"
1a. SETTINGS >
BLUETOOTH Ensure your
Bluetooth is switched on. Then
select [KDC-BT640U] from
the OTHER DEVICES list
2. You will now require the Amazon Alexa App on your iPhone and also an account needs to be set-up before
proceeding. Once downloaded from the App Store DO NOT OPEN the Amazon Alexa App via the App Store. Close the
App Store and then open the Amazon Alexa App directly. If you already have this app and it has been setup go to Fig 3.
1d. The iPhone will now
display Allow Contacts and
Favourites Sync?
Select [PAIR]
www.kenwood-electronics.co.uk
1b. When your iPhone has
found the KDC-BT640U, it will
ask to pair. Select [PAIR]
Amazon Alexa
3. Open
App and
select [DEVICES]
1c. The KDC-BT640U will also display
Push the "VOLUME BUTTON" on the
KDC-BT640U to accept pairing
4. Select [+]
Version0919-1