Satellite Radio Tuner Control (Optional Accessory); Basic Operation; Preset Memory; Satellite Radio Setting - Kenwood KDC-BT645U Instruction Manual

Satellite Radio Tuner Control (Optional Accessory)

[SRC] [VOL]
[ ] / [
[ ] [ ] [BAND]

Basic Operation

Selecting Satellite Radio source
Press the [SRC] button.
Select the "SAT"/ "SIRIUS"/ "XM" display.
⁄
• You need to register to the service provider to receive
the service by Satellite Radio. Consult the service
provider if "CALL ... TO SUBSCRIBE" appears.
• The radio may take a little time to start receiving after
you select the Satellite Radio source.
• If the signal reception fails, "ACQUIRING SIGNAL"/ "NO
SIGNAL" appears.
Selecting the Preset Band
Press the [BAND] button.
Each time you press the button, the receiving band
alternates between the SR1, SR2, SR3 and SR4.
Selecting the channel
Press the [4] or [¢] button.
Selecting the preset channel
Press the [1] – [6] button.

Preset Memory

Putting the channel in the memory.
1
Select the frequency to put in the memory
Press the [4] or [¢] button.
2
Select the number to put in the memory
Press the [1] – [6] button for at least 2 seconds.
⁄
• Only the channel number is stored. Category information
is not stored.
28
|
KDC-BT645U/ KDC-HD545U
]
[1] [6]
—

Satellite Radio Setting

You can select following Satellite Radio Setting
items.
1
Select the Satellite Radio source
Press the [SRC] button.
Select the "SAT"/ "SIRIUS"/ "XM" display.
2
Enter Function Setting mode
KDC-BT645U: Press the [VOL] knob for at least
1 second.
KDC-HD545U: Press the [VOL] knob.
"FUNCTION" is displayed.
3
Select the function item
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "SETTINGS"
Function item Selectable setting/item
"SEEK MODE" Selects the tuning mode of the radio.
CHANNEL: Normal manual seeking control.
PRESET: Search in order of the channels in the
Preset memory
"ESN WATCH" Displays the Electronic Serial Number of satellite
radio.
ESN=
(Factory setting: Underlined)
4
Make a setting
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Function Setting mode
Press the [ ] button for at least 1 second.

Category and Channel Search

Selecting the channel and category you want to
receive.
1
Enter Category and Channel Search mode
Press the [ ] button.
2
Select the Category
Press the [VOL] knob.
3
Select the Channel
Turn the [VOL] knob and press it when the
desired item is displayed.
Cancelling Category and Channel Search mode
Press the [ ] button for at least 1 second.
Function item.