For Mac Os 8.6 To 9.2; For Mac Os; 10.1/10.2.1 Or Greater - imagistics fx2100 Quick Start Manual

Step 2
For Network Interface Cable Users

For Mac OS

Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 11.
1
Make sure that the Network board is
installed into the machine. (See "Optional
accessories" in Chapter 13 of the User's
Guide.)
2
Switch off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh if you already connected an
interface cable.
3
Turn on your Macintosh
4
Insert the supplied CD-ROM into your
CD-ROM drive.
5
Double-click the Start Here OSX folder to
install the printer driver and Remote Setup
program. (Scanning is not supported in
®
OS X 10.1.)
48
Installing the Driver & Software
®
X 10.1/10.2.1 or greater
®
.
6
Select Network Interface, and then click
Install.
7
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
8
Turn on the machine by plugging in the
power cord. Turn the power switch on.
9
Select Applications from the Go menu.