Table of Contents
Advertisement
Step 2
For Network Interface Cable Users
(For Windows
F
Select Network Interface, and then click
Next.
G
Select Standard, and then click Next.
The application files will be copied to your
computer.
If you want to install the PS driver, select
Custom and then follow the on-screen
instructions. When the Select Components
screen appears, check PS Printer Driver,
and then continue following the on-screen
instructions.
H
Select Search the network for devices and
choose from a list of discovered devices
(Recommended), and then click Next.
If you see the following screen, click OK.
I
If the machine is un-configured for your
network:
Select the APIPA or un-configured device
from the list and then click Next. → Go to
40
Installing the Driver & Software
®
98/98SE/Me/NT/2000 Professional/XP)
If the machine is configured for your network:
Select the machine from the list and then
click Next. → Go to
J
Click Configure IP Address.
K
Enter the proper IP Address information for
your network, and then click OK.
(e.g. Enter 192.168.0.103 for IP Address)
L
Click Next.
See the For Administrator section of this guide
or the Network User's Guide located on the
CD-ROM for more network configuration
information.
®
Windows
98/98SE/Me/2000/XP Users
➝ Go to
®
Windows NT
J
➝ Go to
M
N
Users
P
Advertisement
Table of Contents
