For Mac Os; 10.1/10.2.1 Or Greater - imagistics fx2100 Quick Start Manual

Step 2
For USB Interface Cable Users

For Mac OS

Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 11.
1
Switch off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh if you already connected an
interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the printer driver, Scanner driver,
PC-FAX Send and Remote Setup program.
When the language screen appears, select
your language. (Scanning is not supported
in Mac OS
5
Select USB Interface, and then click
Install.
44
Installing the Driver & Software
®
X 10.1/10.2.1 or greater
®
.
®
10.1.)
6
Connect the USB interface cable to your
®
Macintosh , and then connect it to the
machine.
Do not connect the machine to a
USB port on a keyboard or a non
powered USB hub.
7
Turn on the machine by plugging in the
power cord. Turn the power switch on.
8
Select Applications from the Go menu.