For Network Interface Cable Users - imagistics fx2100 Quick Start Manual

Step 2

For Network Interface Cable Users

For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 11.
1
Make sure that the Network board is
installed into the machine. (See "Optional
accessories" in Chapter 13 of the User's
Guide.)
2
Switch off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh if you already connected an
interface cable.
3
Turn on your Macintosh
4
Insert the supplied CD-ROM into your
CD-ROM drive.
5
Double-click the Start Here OS 8.6 - 9.2
icon to install the printer, scanner and PC-
FAX Send drivers. Follow the on-screen
instructions.
46
Installing the Driver & Software
®
8.6 to 9.2
®
.
6
Select Network Interface, and then click
Install.
7
After the installation is completed, restart
®
your Macintosh .
8
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
9
Turn on the machine by plugging in the
power cord. Turn the power switch on.
0
Open the Chooser from the Apple menu.