Table of Contents
Advertisement
Step 2
For Windows
Make sure that you followed the instructions in
G
When this screen appears, connect the
USB interface cable to your PC, and then
connect it to the machine.
Turn on the machine by plugging in the
power cord. Turn the power switch on.
It will take a few seconds for the installation
screen to appear.
The installation of the drivers will
automatically start. Follow the instructions
on the screen.
H
Select BRUSB: USB Printer Port, and then
click Next.
®
98/98SE/Me Users Only
1
F
to
on pages 14 - 16.
I
Accept the default Printer name by selecting
Yes, and then click Next.
J
Select Yes (recommended), and then click
Finish. A test page will be printed so you
can check the print quality.
K
If the test page is printed correctly, click
Yes. If you click No, follow the prompts on
the screen to correct the problem.
If the README file shown in step
appears, close the README file and then
click Finish after printing the page.
Continued...
L
17
Advertisement
Table of Contents
