Setting The Ip Address For Fhis Machine; Setting The Ip Address - Konica Minolta bizhub C450 Print Manual
Print operations
Hide thumbs
Also See for bizhub C450:
- Service manual (780 pages) ,
- Copy operations (608 pages) ,
- Network scanner operations (462 pages)
Table of Contents
Advertisement
3
3.2
Setting the IP address for fhis machine
Use this machine's control panel to assign an IP address to this machine.
Reminder
When specifying network settings, follow the instructions of the network
administrator.
Setting the IP address
1
Press the [Utility/Counter] key on this machine's control panel, touch
[Administrator Setting], and then enter the administrator password.
–
The administrator password is required in order to enter adminis-
trator mode. Ask the administrator of this machine for the adminis-
trator password.
2
Touch [Network Setting], then [TCP/IP Setting].
3
Specify settings for the following:
IP Address: Set the IP address of this machine.
Subnet Mask: Set the subnet mask for the network to which you are
connecting.
Default Gateway: Set the default gateway address for the network to
which you are connecting.
4
To apply the settings, restart this machine (turn it off, then on again).
Turn this machine back on to apply the IP address.
3-6
Setting up network printing
C450
Advertisement
Table of Contents
