Installation instruction
Adjust oil level of power steering to correct level.
When engine is running, top off oil to the
marking. Turn steering several times from full left
to full right lock.
Oil level when oil at normal operating
temperature (approx. 80 " C) 18 - 26 mm below
the top edge of reservoir.
Oil level when oil cold (room temperature,
approx. 20 " C) between Min. and Max.
markings.
29 On models with AC compressor, remove
poly V-belt, install (13-342).
30 Remove and install tensioning device for
V-belt (13-345).
31 Unbolt belt pulley for high pressure pump of
power steering, bolt on (arrows).
32 Unbolt strut (145) for high pressure oil pump
and AC compressor (arrows), bolt on.
Tightening torque 25 Nm.
030812
EXIT