5
Unbolt, bolt up camshaft timing gear, bolt
markings on camshaft timing gear and crankshaft
gear.
Note
On vehicles with oil pressure pump remove
driving disc sleeve (70).
6
Swing tensioner blade (22) for single roller
chain inwards and remove from bearing pin (26),
install.
7
On engines with double roller chain, drive
out bearing pin (26) of the tensioner blade with
the impact extractor 116 589 20 33 00 and
116
extension
589 03 34 00. To do this cut an
M6 thread approx. 10 mm deep on the bearing
pin. Remove tensioner blade.
8
Check plastic support for wear, replace if
necessary.
05.0906 - 330/4
EXIT