Configuring Dvmrp (Web); Dvmrp Global Configuration - Dell Networking N4000 Series Configuration Manual

Configuring DVMRP (Web)

This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring DVMRP on a Dell
Networking N2000, N3000, and N4000 series switches. For details about the
fields on a page, click at the top of the page.

DVMRP Global Configuration

Use the Global Configuration page to configure global DVMRP settings. It is
strongly recommended that IGMP be enabled on any switch on which
DVMRP is enabled. The use cases for enabling DVMRP without IGMP are
few, and enabling IGMP ensures that the multicast router behaves as
expected.
To display the page, click IPv4 Multicast → DVMRP → Global
Configuration in the navigation panel.
Figure 43-48. DVMRP Global Configuration
1394
Managing IPv4 and IPv6 Multicast