Configuring DVMRP (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring DVMRP on a
PowerConnect 8000/8100-series switch. For details about the fields on a page,
click
at the top of the page.
DVMRP Global Configuration
Use the Global Configuration page to configure global DVMRP settings. It is
strongly recommended that IGMP be enabled on any switch on which
DVMRP is enabled. The use cases for enabling DVMRP without IGMP are
few, and enabling IGMP ensures that the multicast router behaves as
expected.
To display the page, click IPv4 Multicast → DVMRP → Global
Configuration in the navigation panel.
Figure 43-48. DVMRP Global Configuration
1226
Managing IPv4 and IPv6 Multicast