Table of Contents
Advertisement
ANSWERING MACHINE
13.2
To change answer delay
Answer delay sets the number of times the Brick will ring before
the answering machine picks up your call and starts playing the
OGM.
You can change this setting to between 2-9 rings or
default setting is 5 rings.
1 Press Menu, the display shows
2 Scroll
to
D
3 Scroll
or
U
4 Scroll
or
U
E
5 Press
NOTE
Saver is set, the answering machine will answer after 2
If Time
rings during remote access if you have new messages. If you
do not have any new messages, it will answer after 5 rings. This
means you can hang up after 3 rings knowing you have no new
messages, saving you time and the cost of the call.
13.3
To switch message alert tone on / off
When you have new messages, with the audible message alert
switched on, you will hear an audible alert once at the handset
and the answering machine base will beep every 10 seconds. The
default setting is Off.
1 Press Menu, the display shows
2 Scroll
to
D
3 Scroll
or
U
4 Scroll
or
U
E
5 Press
13.4
New messages alert
When you have new messages, the display shows
messages.
If you press Back, the screen returns to standby mode and the
icon is displayed.
45
Answer Settings
to
Answer Delay
D
to the setting you want and press Select.
D
to return to standby.
Answer Settings
to
Message Alert
D
Off
On
to
or
D
to return to standby.
Binatone Help: www.meetthebrick.com
Answer
Machine, press Select.
and press Select.
and press Select.
Answer
Machine, press Select.
and press Select.
and press Select.
then press Select.
Time
Saver. The
You have X new
Advertisement
Table of Contents
