Binatone Brick 4home edition User Manual page 52

Poor audio quality
. The base is too close to electrical appliances, reinforced
concrete walls or metal doorframes – move the base at least
one metre away from any electrical appliances.
The signal icon is blinking
. Handset is not registered to the base – register the handset to
the base.
. You are too far from the base – move closer to the base.
No ring tone
. The ring tone is deactivated.
. Increase the volume.
Caller ID service does not work
. Check your subscription with your network operator.
A phonebook entry cannot be stored
. The phonebook is full. Delete an entry to free memory.
No display
. Try recharging or replacing the batteries.
. Try disconnecting and connecting the base power supply.
. If LED is not lit up, then try disconnecting and connecting the
base power supply.
Unable to register another handset
. Maximum number of 11 handsets has been reached.
. The display shows Searching.... You must unregister a handset in
order to register a new one.
Noise interference on your radio or television
. Your base or charger may be too close. Move it as far away as
possible.
. Answering machine does not record messages
Binatone Help: www.meetthebrick.com
HELP
52