Table of Contents
Advertisement
TECHNICAL DETAIL
15
TECHNICAL DETAIL
Standard
Frequency range
Channel Width
Multiple Access
Operating range
Operating time
Temperature range
Electrical power
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions.
Port specification
The
port (connected to the mains power supply) is a SELV port with respect to
EN 60950
The
port (connected to the telephone line) is a TNV port with respect to EN 60950
CLEANING AND CARE
Do not clean any part of your phone system with benzene, thinners or other solvent
chemicals as this may cause permanent damage which is not covered by the Guarantee.
When necessary, clean it with a damp cloth.
Keep your phone system away from hot, humid conditions or strong sunlight, and
don't let it get wet.
Every effort has been made to ensure high standards of reliability for your phone
system. However, if something does go wrong, please do not try to repair it
yourself, but consult your supplier or the Helpline.
55
Digital Enhanced Cordless
Telecommunication (DECT)
1881.7920 MHz (Ch 9) to 1897.3440 MHz (Ch 0)
1.728MHz
TDMA/FDMA
Up to 1000m outdoors; Up to 50m indoors
Standby: 200 hours, Talking: 10 hours
Operating 10°C to +40 °C, Storage -20°C to +60 °C
Base unit:
MEIC: MN-A102-U130
Input: 100-240V 50/60Hz 200mA, Output: 6V DC 400mA
Charger unit:
MEIC: MN-A102-U130
Input: 100-240V 50/60Hz 200mA, Output: 6V DC 400mA
Battery Information
Sanik - Rechargeable 2 x 550mAh NIMH Battery
Binatone Help: www.meetthebrick.com
Advertisement
Table of Contents
