Kenmore Washer/Dryer Owner's Manual And Installation Instructions page 27

C. RI--MOVE SHIPPING STRAP
Removing the shipping strap is
necessary for smooth operation.
If the shipping strap is not removed,
the laundry center will make
excessive noise.
To prevent floor damage, set laundry
center onto cardboard before moving
across floor.
Move; laundry center close to its final
location.
STEP 1. Read, then remove the label
over the shipping strap.
STEP 2. Pull the yellow shipping strap
completely out of the laundry center.
Ther,_ should be three cotter pins on the
end of the shipping strap t!hat comes out
of the laundry center.
Shipping strap
STEP 3. Cut the shipping strap about
16 inches from plug end. Look for the
words "CUT HERE:' Discard end with
three cotter pins. You will use the
remaining piece of shipping strap to
secure the drain hose.
PU
27
t=