Noise from the Separation Claws
552 / 652
RETURN TO
CONTENTS
C451 / C550 / C650
C452 / C552 / C652 / C552DS / C652DS
SYMPTOM
A vibrating noise may be generated involving the separation claws.
CAUSE
The tips of the separations claw interfere with the surface of the fusing roller. As a permanent correction, the
shape of the claw shaft hole has been changed.
FIELD ACTION
Worm screw
Using the worm screw, adjust the gap between the
Holder
separation claws and the fusing roller until the noise
disappears.
Check to be sure that the adjustment does not permit
paper jamming.
Claw
Page 17 of 18
December 19, 2011