Table of Contents
Advertisement
1. Overview
Alcatel-Lucent IP Touch 4008 EE/4018 EE sets are IP sets of the Alcatel-Lucent 8 series range.
The Alcatel-Lucent IP Touch 4018 EE Phone set is available as of R6.1.1. The Alcatel-Lucent IP
Touch 4008 EE Phone set is available as of R7.1.
Alcatel-Lucent IP Touch 4008 EE/4018 EE phone Extended Edition sets are IP sets of the
Alcatel-Lucent IP Touch 8 series phone Extended Edition range. They are available as of
R8.0.1.
Alcatel-Lucent IP Touch 4008 EE/4018 EE and Alcatel-Lucent IP Touch 4008 EE/4018 EE
phone Extended Edition sets present minor differences, expressly indicated where applicable.
When their features and capabilities are identical, only Alcatel-Lucent IP Touch 4008 EE/4018
EE sets are mentioned.
Alcatel-Lucent IP Touch 4008 EE/4018 EE phone Extended Edition sets provide extended
memory capacity (8 Mbytes FLASH and 16 Mbytes SDRAM).
As of R9.1, Alcatel-Lucent IP Touch 4008 EE/4018 EE phone Extended Edition sets can boot in SIP
mode (SIP standalone feature). In this case, Alcatel-Lucent IP Touch 4008 EE/4018 EE phone
Extended Edition sets are linked to a proxy acting as a PCX and operate as SIP sets.
The following chapters in this document describe the SIP mode initialization, the SIP Binaries
updating, the phone features, the SIP configuration files description and the maintenance.
2. SIP Stand-Alone Mode
Initializing a Set in SIP Mode
2.1.
SIP Configuration Files
2.1.1.
In SIP mode, the set downloads configuration files from the server defined in the TFTP server
address in MMI.
The TFTP address is received from DHCP or statically defined from the set.
Configuration files are:
–
sipconfig.txt: this file is optional and contains all parameters required for operation. This
file configures all SIP sets of the system with the same parameters.
–
sipconfig-MacAddress.txt : this file is mandatory and allows to configure specific
parameters for a set defined with its MAC address. For example, the sipconfig-
00809F5607AE.txt file contains specific parameters for a set with the 00:80:9F:56:07:AE
physical address.
If this file does not exist, only the parameters contained in the sipconfig.txt file are
used.
All Rights Reserved © Alcatel-Lucent 2009
Page 3
Hide quick links:
Advertisement
Table of Contents
