Table of Contents
Advertisement
The two files have the same list of parameters.
Parameter values from the sipconfig-MacAddress.txt file override parameters of the
sipconfig.txt file. This applies only when the concerned parameter has been assigned a value
in the sipconfig-MacAddress.txt file.
Examples 1:
user name parameter
In the file sipconfig.txt the parameter user name is set to Alcatel-Lucent. As a result, all sets of
the system have the same name: Alcatel-Lucent.
For the set with MAC address 00:80:9F:56:07:AE, the file sipconfig-00809F5607AE.txt exists and
contains the parameter user name = Smith. As a result, this set is called: Smith and not: Alcatel-
Lucent.
Examples 2:
proxy_addr parameter
In the file sipconfig.txt the parameter proxy_addr is set to 192.168.110.80. As a result,
all sets share the same proxy.
For the set with MAC address 00:80:9F:56:07:AE, the file sipconfig-00809F5607AE.txt
contains the parameter proxy_addr. This parameter has no assigned value. As a result, this set
uses the proxy defined in the sipconfig.txt file.
sipconfig.txt and sipconfig-MacAddress.txt files are built with the SIP Device
Management application (SDM).
For more information on the structure of the sip configuration files, see:
Description.
When the set is registered with success, all parameters are saved in the non volatile memory
(flash memory) of the set. Saved parameters are used in case of TFTP server failure.
SIP Set Binaries
2.1.2.
The SIP binary files must be set in the server in the same location as the sipconfig.txt and
sipconfig-MacAddress.txt configuration files.
The available binary files for Alcatel-Lucent IP Touch 4018 EE phone Extended Edition sets are:
–
noesip4018 (application)
–
datesip4018 (resources including the ringing melodies)
Except for their name, Alcatel-Lucent IP Touch 4008 EE phone Extended Edition set binary files
are identical.
All Rights Reserved © Alcatel-Lucent 2009
§ SIP Configuration Files
Page 4
Hide quick links:
Advertisement
Table of Contents
