Care and cleaning
38
Fitting the side racks
For ease of cleaning you may remove the side racks. Take care to replace
them correctly after cleaning.
Remove all shelves and trays.
1
For easier access, you may remove the oven door. See 'Removing the oven door' .
2
OR90 models
Using a small coin or a flat-head screwdriver, loosen and remove the front and back fixing screws,
3
as shown.
Remove the side rack.
4
Refit the side racks.
5
- make sure that they are the right way up, as in the illustrations, and that you tighten the fixing
screws.
OR60 models
Lift and remove the side rack.
3
After cleaning, refit the side racks - make sure
4
they are the right way up (Fig. 42).
Storage drawer (OR60 models only)
The drawer opens like a normal drawer.
Important!
Do not store flammable material in the oven or drawer.
Fig. 41 Removing the side racks - OR90 models
Fig. 43 Storage drawer - OR60 models
Fig. 42 Removing the side racks - OR60 models