Setting The Clock; Setting Kilometers Or Miles - KTM 690 SMC 2008 Setup Instructions

WORK

Setting the clock

3.13

Setting kilometers or miles

3.14
Info
If you change the unit, the ODO value is retained and converted accordingly.
Making the setting according to the country.
Condition
The motorcycle is standing.
– Switch on the ignition by turning the ignition key in the position
(690 SMC USA).
–
Press the MODE button several times until the ODO display mode is active.
–
Keep the MODE button and the SET button pressed simultaneously.
The time begins to flash.
–
Press the MODE button to adjust the hour.
–
Press the SET button to adjust the minute.
–
Keep the MODE button and the SET button pressed simultaneously.
700115-10
The time is set.
Condition
The motorcycle is standing.
– Switch on the ignition by turning the ignition key in the position
(690 SMC USA).
–
Press the MODE button several times until the ODO display mode is active.
–
Keep the MODE button pressed until the display mode changes from Km/h to Mph or
from Mph to Km/h.
Guideline
Activation duration of MODE button
700120-01
10 s
11